The first Mac OS X 10.8 update is now available through the app store, weighing in at a surprisingly trim 24.2 Mb. It’s just installed on my Macbook Air while my main Hackintosh starts the ritual backup before a system update. No mention of the widely reported battery life issue 10.8 brought to some Mac laptop users.
No problems with the update on Apple hardware so far, the only warning I received was of incompatible software. This turned out to be the Avira antivirus I have been trying, but it’s still present and working correctly. Here are the official Apple release notes for issues addressed by the 10.8.1 update.
About OS X Mountain Lion Update v10.8.1
This update includes general operating system fixes that improve the stability and compatibility of your Mac, including fixes that:
- Resolve an issue that may cause Migration Assistant to unexpectedly quit
- Improve compatibility when connecting to a Microsoft Exchange server in Mail
- Address an issue playing audio through a Thunderbolt display
- Resolve an issue that could prevent iMessages from being sent
- Address an issue that could cause the system to become unresponsive when using Pinyin input
- Resolve an issue when connecting to SMB servers with long names
- Address a issue that may prevent Safari from launching when using a Proxy Automatic Configuration (PAC) file
- Improve 802.1X authentication with Active Directory credentials.
For detailed information on this update, please visit this website: http://support.apple.com/kb/HT5418.
For information on the security content of this update, please visit: http://support.apple.com/kb/HT1222.
There are plenty of excellent reviews of Mac OS 10.8 Mountain Lion, so this post will focus on the steps taken to upgrade my fully working 10.7.4 system to 10.8. This is not intended as a complete install-from-nothing guide, requiring a working 10.7.x system to start with.
First some details on the hardware used. My Gigabyte P35-DS3R/Q6600 system was re-purposed at the start of 2012, and replaced with the following:
- Gigabyte Z68XP-UD3 Motherboard
- Intel Core i5 2500k cpu
- 16Gb DDR3 Ram
- Nvidia 9800GT 1Gb video card from previous system
- 2Tb and 1.5Tb hard drives from previous system
- DVD-RW and BD-Rom from previous system Read more…
In July 2009 I built a small Intel Atom based file server that ran Mac OS 10.5 Leopard. It served as a NAS box and later ran 10.6 Snow Leopard with the Plex media server feeding my HTPC and a WDTV box through network shares. While there was enough processor power available for these simple tasks, new developments were beyond the limited power the Atom offers. The Plex Media Server can now stream and transcode to iOS clients, if your CPU is up to the task. Lion Server is available as a $50/£35 add-on for the Lion operating system, adding all the server functionality you could want. iTunes will act as a music server for all the computers in the house. With so many possibilities available, it was clearly time for an upgrade. Read more…
After the changes made upgrading my P35-DS3R/Q6600 hackintosh to 10.6.8, I expected downloading Mac OS 10.7 to be a breeze. It appears that the App store application has some built in checks that block the purchase/download on unsupported hardware. My first response was to try some different smbios.plist files, including the widely suggested MacPro 3,1 type, then try editing these. None of those attempts gave any success, so the next step was a search for suggestions from the many excellent Hackintosh forums.
One method I found was to install the latest version of Tonymac86’s Chimera bootloader, V1.4.1. This is available from the Tonymac86 site as either a standalone installer or part of the MultiBeast package. The Lion purchase/download then worked perfectly. I had some unexpected side effects as well, such as losing my VPN configuration and being unable to get it working again. I searched for reasons for this and suspect it was something to do with changes to the Ethernet port en0 setup. The easiest and fastest fix was to copy the Lion installer to my server and restore the disk to the backup I had made just before installing Chimera, finally copying the Lion Installer back again. I always repeat how important it is to make a backup before any big changes to a hackintosh installation, and once again it saved me a lot of time and effort.
This ended up being a lot of effort to buy and download Lion. I’ve always felt it’s important to buy the software even if I’m not within the terms of the EULA by running it on generic hardware. At £20.99/$29.99 it’s very cheap compared to the cost up upgrading a Windows system, and rampant piracy within the hackintosh community will not encourage Apple to continue to ignore us as it has done so far. Also, I already save a huge amount running Mac OS on generic hardware, saving £21 more seems as petty.
This post has been delayed a long time, partly due to the changes I made to my Hackintosh during the 10.6.8 update and partly due to Mac OS 10.7 Lion. Previous 10.6.x updates had been fairly straightforward, often needing nothing more than a change to the PMversion of SleepEnabler in com.apple.Boot.plist. That approach didn’t work with the 10.6.8 update. I tried using PMversion=23 but this resulted in a crash during boot for PMversion/kernel miss-match. A search of several hackintosh forums showed that this was working for some people, while others were using PMversion=0 to disable SleepEnabler. Read more…
PwnageTool and Redsn0w have been updated, and both allow jailbreaking a range of iOS devices without tethering. This walk through covers PwnageTool 4.3, with another covering Redsn0w to follow. The main difference between the two apps is the method of jailbreaking. PwnageTool makes a custom Firmware file that iTunes puts onto the device. Redsn0w jailbreaks a device after iTunes has installed a standard Apple Firmware.
Before starting a jailbreak using PwnageTool or Redsn0w you need the correct firmware for your device. I used a great guide at iClarified that links to every iPhone firmware that has been released. My iPhone is a 3GS so the firmware I wanted was the 4.3.1 (3GS): iPhone2,1_4.3.1_8G4_Restore.ipsw. Once downloaded and placed on my desktop I launched Pwnagetool 4.3.
Apple this week released Mac OS 10.6.7, the latest maintenance release for its Snow Leopard Operating System. I’ve tested this on my main hackintosh with no problems found. A new version 4.5 of Mail is installed as part of the update, which is incompatible with the Letterbox Mail add-on.
Letterbox developer Aaron Harnly has already released version 0.24b9 for 10.6.7 compatibility, so within 10 minutes of upgrading I had mail back to it’s widescreen glory. Thanks to Aaron for his work on this most useful and free plugin.
- 3 days before wedding @RadissonBlu Limerick tell Bride and Groom no rooms available for 80 guests flying in from UK. Hotel has overbooked. 1 year ago
- RT @danthat: Come on, Valve. Today. On this special day. A trailer, an announcement, anything. 2 years ago
- Thanks @Ubisoft, now I can't reset my password to play the game I PAID for. Do you want to increase piracy? http://t.co/c349mTkGXv 2 years ago
- You Might Want to Wait Before Updating Some Devices to iOS 7 - highly recommended for the iPad 3. osxdaily.com/2013/09/16/wai… 3 years ago
- The fantastic System Shock 2 is now available on GOG.com, compatible with windows XP, Vista, 7 and 8. gog.com/gamecard/syste… 3 years ago
- Adding an SSD to a hackintosh HD installation
- Switching from BIOS to UEFI
- OS X Mountain Lion Update v10.8.1 released
- Hackintosh upgrade from 10.7 to 10.8
- iPad WiFi 3rd generation review
- iPad 3rd Generation unboxing and screenshots
- Thoughts on the new iPad
- Moving to Crashplan online backup
- What’s up with Backzup?
- Lion SMB problems and using a WDTV media streamer
- 1,814,142 hits