Archive

Archive for the ‘hackintosh’ Category

10.6.5 on Hackintosh

November 13, 2010 14 comments

Mac OS X 10.6.5 is out, and I have sucessfully installed the update on my main hackintosh with one minor change to my com.apple.Boot.plist. To recap, the important hardware in this hackintosh comprises:

  • Gigabyte Ga-P35-DS3R motherboard
  • Intel Core 2 Quad Q6600 processor
  • 4Gb 667 Mhz DDR2 SDRam
  • Nvidia GeForce 9800GT video card

The 10.6.5 update includes a new Kernel (Darwin 10.5.0) which doesn’t match the current custom SleepEnabler.kext, so will cause a kernel panic during startup. This is easily fixed, as SleepEnabler.kext can be passed an instruction through the com.apple.Boot.plist Kernel Flags section to set its declared version to match the kernel. Here’s my com.apple.Boot.plist from /Extra with the added instruction in red. Read more…

Advertisements

Lnx2Mac’s Realtek RTL81xx Driver

October 14, 2010 1 comment

One of the problems I encountered with my original Gigabyte GA-P35-DS3R motherboard based hackintosh was the network interface. The Realtek 8111B chip on the motherboard didn’t work very well with OSX’s drivers, and a workaround was required. With Snow Leopard I used a modified version of ifconfig and a script to get the network interface working correctly with bonjour, so the useful auto discovery features would work (iTunes, Finder etc.)

This worked well but wasn’t very elegant, so I was happy to discover Lnx2Mac’s port of the Realtek Linux RTL81xx driver. I disabled the ifconfig script and dropped Lnx2Mac’s driver into /Extra/Extensions, and after running a few terminal commands to set permissions/owners and rebuilt caches (see step 6 here) it’s working great.

Thanks to Lnx2Mac for the work that went into porting this driver, and if it helps you out you can make a donation from the project page.

The Hackinfireplace

June 21, 2010 2 comments

I’ve been working on my latest hackintosh for a while now, with the last finishing touches taking much longer than anticipated. They’re all in place now so it’s time to reveal the hackinfireplace. That’s it in the video above, showing a couple of the HD videos that are launched using the function keys of a small wireless keyboard/trackpad. There’s a kitchen plinth heater hidden behind a removable piece of skirting under the display for those rare occasions when a bit of extra heating is needed.

The birth of this project was a visit to a DIY superstore as part of gutting and decorating the Lounge/Living Room. The choice of wall colours was easy, Oak floor agreed on and a new Leather Sofa and chairs a given. The choice of fireplace was more problematic. The existing fireplace was old, but not in a good antique way. Modern hang on the wall electric fires can look tacky with their fake flame effects, and the more expensive electric and gas wall mounted fires can get very costly. Most of those I saw with relatively easy fitting hung on the wall, protruding anywhere from four to six inches. They look fine from the front, but not so good from the side. What I really wanted was a fire flush with the wall, but that’s the point the cost starts rocketing. While in the DIY store myself and Mrs Basshead saw an LCD wall hung fire. A 19 inch screen played video’s of various fire’s, and there were also a few other scenes available. A remote control selected the video’s and also operated the 2kw heaters . A nice idea, but still wall hung not flush. The available video’s were also not great quality and the screen was not very high resolution. Read more…

10.6.4 tested on hackintosh

June 17, 2010 3 comments

My original hackintosh has now been updated to 10.6.4, and as was the case with the past few updates a new version of sleepenabler.kext was required to prevent a kernel panic during boot. The 10.6.4 sleep enabler is available from Insanelymac.

The Snow Leopard Mail application has received an update to version 4.3, showing the above dialogue when first launched. The upgrading of mail messages took only a few seconds, unfortunately it was followed by this warning.

Letterbox is a Mail plugin that adds a widescreen view with the message preview pane on the right of the window. Fortunately developer Aaron Harnly already has an update to Letterbox 0.24b7 which is compatible with 10.6.4.

10.6.4 released

June 16, 2010 Leave a comment

Apple has today released the latest update to its Snow Leopard operating system, 10.6.4. Full details of the fixes included are available at support.apple.com/kb/HT4150, and details of the security content at support.apple.com/kb/HT1222. A quick look at several hackintosh forums showed mixed upgrade results. A new 10.6.4 version of Sleepenabler.kext is available to try, and further compatibility  details will be posted once I have installed the update on my three applicable hackintosh systems.

Snow Leopard on Acer Aspire One AOA150/ZG5

April 4, 2010 243 comments

Over the past few years the equipment I take on holidays (vacations) had shrunk to a Canon HF100 video camera, Panasonic Lumix LC3 camera and Macbook. The cameras are compact and capable of excellent results, but the Macbook while not enormous is still bulky. Since my holiday usage is storing photo’s and video with a bit of email and web browsing the ideal replacement would seem to be a netbook. Read more…

10.6.3 on Hackintosh

March 30, 2010 5 comments

The Mac OSX 10.6.3 update is working fine on my main hackintosh, installed through Software Update. The only file that needed replacing (just before running the update) was the 10.6.2 version of SleepEnabler.kext. Following the advice at Insanelymac and Netkas.org I downloaded the 10.6.3 version from Meklort’s Blog. Thanks to all those providing advice and files.