Archive

Posts Tagged ‘gigabyte’

Switching from BIOS to UEFI

November 3, 2012 1 comment

For the past few generations of OSX on generic Intel hardware there has been a choice between using a DSDT matched to your motherboard and BIOS, or a selection of additional files to provide full hardware support. My own machines have used the DSDT approach, where a well edited DSDT file provided the best compatibility and smoothest experience. Many of these DSDT files are available with all the hard work done for you at tonymacx86, whose selection of files cover seven motherboard manufacturers including my favourite Gigabyte.

Earlier this year there was much excitement at Gigabyte’s release of the Z77 motherboards which used a new UEFI rather than the traditional BIOS. The biggest surprise here was that Gigabyte boards with the new UEFI did not need a DSDT file for all hardware to work, simplifying the job of getting a hackintosh running well. My own board, a GA-Z68XP-UD3 had a beta UEFI available, soon followed by release U1g. I followed a couple of great guides at TonyMacX86 for upgrading my motherboard from BIOS to UEFI, then configuring the UEFI settings (this is for 7 series motherboards but worked well for me). Read more…

Categories: hackintosh Tags: , , , , ,

Hackintosh HTPC part 2

January 31, 2009 5 comments

Having decided to build a hackintosh HTPC in part 1, the next step is picking hardware. This would normally include a display and this project is no different. The display this time though is an LCD television instead of the usual LCD monitor.

I had a short list of potential TV’s and the top was occupied by a couple of Sony models, the 40V4000 and 40W4000. The decision on which to go for would depend on what deals were available as the spec is similar, with the 40W4000 being a 10 bit panel (instead of 8 bit) and adding some multimedia features. Next on the list were Samsung’s 6 series models. A local retailer had an older Samsung 46″ 5 series and a Sony 40L4000 (a cut down 40V4000) hooked up to a Vista PC through a KVM switch, running at something like 1366×768 resolution. I increased the resolution to 1920×1080 and to my surprise the Sony showed an unsupported display mode message while the Samsung looked fantastic. Read more…

Follow

Get every new post delivered to your Inbox.

Join 62 other followers